EHI hdp lrt Gravure Japanese_Newspaper_OEM_Engine Lotem_Quantum Magnus_400 Magnus_800 Magnus_VLF Slave_MCE_Firmware Thermoflex Think_Motion_Controller Trendsetter_400/800 Trendsetter_NEWS Trendsetter_Series_4 Workstation images cannot be launched until this timer expires. The timer starts when the door is closed or after the thermal head has completed initializing. When a door is opened, the 24V/48V to the head is lost. This effectively disables the laser beam positioning. When the door is closed, the 24V/48V to the head is reenabled. A certain time must pass before the laser is turned on to allow the beam positioning to stabilize. Note that the "laser on" command can be used before the timer expires. It may or may not be successful. An appropriate error message is generated if the command is not successful. This parameter is available.

Please issue the appropriate monitor command to determine this parameter's default value.

Please issue the appropriate monitor command to determine this parameter's minimum and maximum values.

07-May-2002 Normal

..\..\ShowAllErrors.htmFirmware 1 Error Index

..\..\ShowAllCommands.htmFirmware 1 Command Index

..\..\ShowAllParameters.htmFirmware 1 Parameter Index

Updated: Thu Jul 17 07:23:57 2008 PST